HM9-Fully Automatic Screw lock machine with Self feeding screw system
- Model
- HM9
Item specifics
- Machine dimension
- 1150*1220*1750mm
- XYZ Dimension:
- X:500mm Y:500mm Z:100mm
- I/O Signal
- 8INPUT/8OUTPUTS
- XYZ lock range
- According to customer products size
- Screw slip detection
- Yes
Review
Description
HM9-Fully Automatic Screw lock machine with Self feeding screw system
Introduction:
Features:
1.Used to finished product assembly screws locking , ensure the products good packaging function
2.Adopt Japan BM6-Z lock module+Directly intelligent screening feeder.
3.Machine automatic finished locking screw according to pre-set coordinate.
4.Replacement products just need modifty PLC lock point coordinates ,
5.High first pass yield and precision ,Lock screw quality is stable and reliable,
6.Auxiliary function: screw slip detection, screw lock leakage detection,
7.Screw floating lock detection, bad screw statistics, screw in detection
8.CCD visual programming function, to ensure good accuracy and convenience
9.With HJ-HSF-50Nservo electricdriver system
Specification:
Machine |
Machine dimension: |
About 1150*1220*1750mm(according to products size) |
XYZ Dimension: |
X:500mm Y:500mm Z:100mm |
|
Voltage: |
AC 220V 50HZ |
|
Power: |
about 750W |
|
Temp : |
-20℃-40℃ |
|
Frame: |
Steel plate + rectangular tube +aluminum alloy frame |
|
Conveying way: |
Lead screw robo cylinder+servo motor+Electricaland pneumatic combination |
|
Screw feeding way: |
BM6-Z self-feedig |
|
Screw lock speed: |
1.5-2.5 sec/time;(Depends route and screw length) |
|
Max running speed: |
500mm/s |
|
Control system |
Main control program |
PLC Control |
HMI |
Touch screen |
|
Program input |
Coordinate input or Teaching input |
|
I/O Signal |
8INPUT/8OUTPUTS |
|
Communication |
Serial port RS232C |
|
Program storage |
50 group (according to customer request edit program,program free switch) |
|
Posistion |
Position precision |
PANASONICS servo motor +Driver X,Y:+/-0.05mm |
PANASONICS servo bake motor+Driver(option) Z:+/-0.02mm |
||
Screwdriver |
Screwdriver model |
HJ-HSF-50N |
Torque |
3-5kgf.cm |
|
Screw feeder |
Feeding module model |
BM6-Z |
Application |
XYZ lock range |
According to customer products size |
Z axis lock range |
0-100mm.Special dimension need customize |
|
Screw lock |
According to customer products size |
|
Products&fixture size |
According to customer products size |
|
Detection |
Screw slip detection |
Yes |
Screw leakage detection |
Yes |
|
NG Screw tighen detection |
Alarm light + buzzer on |
|
Optional |
CCD |
Teaching assitant position |