HR6-P5331 Desktop Screw driving robot
- Model
- HR6-P5331
Item specifics
- Dimension size
- 560(W) x 650(H) x 680(D) mm
- Power supply
- AC 220V 50HZ
- Running speed
- 300mm/s
- Feeder
- HR3-120 screw feeder
- Screw lock products size
- 200*240
Review
Description
HR6-P5331 Desktop Screw driving robot
Fatures：
Adopts vacuum suction screw method, high universality, overcome the blowing screw can't send the screw length diameter ratio less than 1.2mm, also overcomes the disadvantage of magnetic suction way can’t
suction stainless steel screw . for M1.0 - M4.0 screws all can be
applied, such as screw size changed, just
need to change the suction nozzle.
1.Applies to most of the screws, strong commonality, the screw length to
diameter ratio and material there is no requirement.
2.Can replace artificial specific screw lock pay operations, realizing
mechanization production.Reduce the labor intensity of workers.The traditional
manual screw placement, and alignment of the screw head need to work takes up a
lot of time and energy.
3.Do not need to match the external computers , convenient installation.Setting operation is simple, the staff quickly
master the operation skill and
debugging.
4.
Apply to mobile phones, digital products,
photoelectric, health care, small household electrical appliances.
Specification:
|
Machine
construction |
Machine
dimension： |
560(W) x 650(H)
x 680(D) mm （according to products size） |
|
XYZ Dimension： |
X:500mm Y1：300mm
Y2:300mm Z:100mm |
|
|
Voltage： |
AC 220V 50HZ |
|
|
Power： |
App 450W |
|
|
Temp: |
-20℃-40℃ |
|
|
Frame： |
Aluminum alloy
high strength structural movement platform |
|
|
Conveying way： |
Linear guide
module+Belt+Step motor+close loop driven |
|
|
Screw feeding
way： |
HR3-120 screw feeder + tighten gripper+Vacuum sunck nozzle
+screwdriver bits |
|
|
Screw lock
speed： |
1.2-1.8S/pcs
(not included load &unload time) |
|
|
Max running
speed： |
300mm/s |
|
|
Control System |
Main control
program |
SCM/PLC Control |
|
HMI |
Teach
programming input |
|
|
Program input |
Teaching input |
|
|
I/O Signal |
8INPUT/8OUTPUTS |
|
|
Communication |
serial port
RS232C |
|
|
Program storage |
49group(according
to customer request edit program,program free switch) |
|
|
Posistion |
Precision
request |
X,Y1，Y2:+/-0.05mm |
|
precision |
Z:+/-0.02mm； |
|
|
Screwdriver |
Brand |
KILEWS
screwdriver |
|
Torque |
0.5-6kgf.cm |
|
|
Screw feeder |
Feeder |
HR3-120 screw
feeder |
|
Application
range |
XYZ lock range |
500*300*300*100 |
|
Screw lock products size |
200*240 |
|
|
screw size |
M1-M4 |
|
|
Products&fixture
size |
According to
customer products size |
|
|
Detection |
Screw slip
detection |
yes |
|
Screw leakage
detection |
Yes |
|
|
NG Screw tighen
detection |
Alarm light +
buzzer on |
