HR6-P331 Desktop Screw driving robot
HR6-P331 Desktop Screw driving robot
Model
HR6-P331

Item specifics

Dimension size
480(W) x 520(H) x 680(D) mm
Power supply
AC 220V 50HZ
Running speed
300mm/s
Feeder
HM3-A1
Screw lock products size
180*200*100mm

Review

Description

                HR6-P331 Desktop Screw driving robot

Fatures

Adopts vacuum suction screw method, high universality, overcome the blowing screw can't send the screw length diameter ratio less than 1.2mm, also overcomes the disadvantage of magnetic suction way can’t suction stainless steel screw . for M1.0 - M4.0 screws all can be applied, such as screw size changed, just need to change the suction nozzle.
1
.Applies to most of the screws, strong commonality, the screw length to diameter ratio and material there is no requirement.
2
.Can replace artificial specific screw lock pay operations, realizing mechanization production.Reduce the labor intensity of workers.The traditional manual screw placement, and alignment of the screw head need to work takes up a lot of time and energy.
3
.Do not need to match the external computers , convenient installation.Setting operation is simple, the staff quickly master the operation skill and debugging.
4
. Apply to mobile phones, digital products, photoelectric, health care, small household electrical appliances.

Specification:

Machine dimension

480(W) x 520(H) x 680(D) mm according to products size

XYZ Dimension

X:250mm Y:250mm   Z:100mm

Voltage

AC 220V 50HZ

Power

App 450W

Temp:

-20-40

Frame

Euro standard Aluminum alloy high strength structural movement platform

Conveying way

Linear guide module+synchronous belt+ Closed loop motor drive module

Screw feeding way

 HM3-A1 screw feeder  + HC4 tighten gripper+screwdriver bits + HE5 screwdriver head

Screw lock speed

1.2-1.8S/pcs (not included load &unload time)

Max running speed

300mm/s

Main control program

Panasonic PLC Control

HMI

Touch screen

Program input

Teaching input

I/O Signal

8INPUT/8OUTPUTS

Communication

serial port RS232C /USB

Program storage

10-20  group(according to customer request edit program, free switch)

Precision request

X,Y :+/-0.05mm

Z:+/-0.02mm

Brand

KILEWS

Torque

1-5.5kgf.cm

Feeder

HM3-A1

XYZ lock range

250mm*250mm*100mm

Screw lock  products size

180*200*100mm (Depends on products)

screw size

M1-M5

 

 

 

Products&fixture size

According to customer products size

Screw slip detection

yes

Screw leakage detection

Yes

NG Screw tighen detection

Alarm light + buzzer on